Table of Contents
Advertisement
C
L
OMMAND
INE
• The IP frame header also includes priority bits in the Type of Service
(ToS) octet. The Type of Service octet may contain three bits for IP
Precedence or six bits for Differentiated Services Code Point (DSCP)
service. To specify the IP precedence priority, use the set tos keywords.
To specify the DSCP priority, use the set dscp keywords. Note that the
IP frame header can include either the IP Precedence or DSCP priority
type.
• The precedence for priority mapping by this switch is IP Precedence or
DSCP Priority, and then 802.1p priority.
Example
Console(config)#interface ethernet 1/12
Console(config-if)#match access-list ip bill set dscp 0
Console(config-if)#
Related Commands
show marking (4-136)
show marking
This command displays the current configuration for packet marking.
Command Mode
Privileged Exec
Example
Console#show marking
Interface ethernet 1/12
match access-list IP bill set DSCP 0
match access-list MAC a set priority 0
Console#
Related Commands
match access-list ip (4-135)
4-136
I
NTERFACE
Advertisement
Table of Contents
