C
L
OMMAND
INE
The access mode shown in the following tables is indicated by these
abbreviations:
PE (Privileged Exec)
NE (Normal Exec)
GC (Global Configuration)
IC (Interface Configuration) ACL (Access Control List Configuration)
Line Commands
You can access the onboard configuration program by attaching a VT100
compatible device to the server's serial port. These commands are used to
set communication parameters for the serial port or Telnet (i.e., a virtual
terminal).
Command
line
login
password
timeout login
response
exec-timeout
password-thresh Sets the password intrusion threshold, which
silent-time
*
databits
4-14
I
NTERFACE
Table 4-5 Line Commands
Function
Identifies a specific line for configuration and
starts the line configuration mode
Enables password checking at login
Specifies a password on a line
Sets the interval that the system waits for a
login attempt
Sets the interval that the command interpreter
waits until user input is detected
limits the number of failed logon attempts
Sets the amount of time the management
*
console is inaccessible after the number of
unsuccessful logon attempts exceeds the
threshold set by the password-thresh
command
Sets the number of data bits per character that
are interpreted and generated by hardware
VC (VLAN Database Configuration)
MST (Multiple Spanning Tree)
LC (Line Configuration)
Mode Page
GC
4-15
LC
4-16
LC
4-17
LC
4-18
LC
4-19
LC
4-20
LC
4-21
LC
4-22