Example
The following shows LACP enabled on ports 6-8. Because LACP has also
been enabled on the ports at the other end of the links, the show
interfaces status port-channel 1 command shows that Trunk1 has been
established.
Console(config)#interface ethernet 1/6
Console(config-if)#lacp
Console(config-if)#exit
Console(config)#interface ethernet 1/7
Console(config-if)#lacp
Console(config-if)#exit
Console(config)#interface ethernet 1/8
Console(config-if)#lacp
Console(config-if)#end
Console#show interfaces status port-channel 1
Information of Trunk 1
Basic information:
Port Type:
Mac Address:
Configuration:
Name:
Port admin:
Speed-duplex:
Capabilities:
Port security:
Max MAC count:
Current status:
Created by:
Link status:
Operation Speed-duplex: 10G full
Member Ports:
Console#
L
INK
10G
00-0C-DB-21-11-34
Up
10G full
Disabled
0
Lacp
Up
Eth1/6, Eth1/7, Eth1/8,
A
GGREGATION
C
OMMANDS
4-189