SMC Networks 8708L2 - annexe 1 Management Manual page 109

• Trap Inform – Notifications are sent as inform messages. Note that
this option is only available for version 2c and 3 hosts. (Default: traps
are used)
- Timeout – The number of seconds to wait for an acknowledgment
before resending an inform message. (Range: 0-2147483647
centiseconds; Default: 1500 centiseconds)
- Retry times – The maximum number of times to resend an inform
message if the recipient does not acknowledge receipt. (Range:
0-255; Default: 3)
• Enable Authentication Traps
specified IP trap managers whenever authentication of an SNMP
request fails. (Default: Enabled)
• Enable Link-up and Link-down Traps
message whenever a port link is established or broken. (Default:
Enabled)
6. These are legacy notifications and therefore when used for SNMP Version 3 hosts, they must be enabled
in conjunction with the corresponding entries in the Notification View (page 3-66).
S N
IMPLE ETWORK
6
– Issues a notification message to
M
ANAGEMENT
– Issues a notification
6
P
ROTOCOL
3-57