C
L
OMMAND
INE
Command Usage
• You cannot set a null password. You will have to enter a password to
change the command mode from Normal Exec to Privileged Exec with
the enable command (page 4-27).
• The encrypted password is required for compatibility with legacy
password settings (i.e., plain text or encrypted) when reading the
configuration file during system bootup or when downloading the
configuration file from a TFTP server. There is no need for you to
manually configure encrypted passwords.
Example
Console(config)#enable password level 15 0 admin
Console(config)#
Related Commands
enable (4-27)
authentication enable (4-96)
IP Filter Commands
Command
management
show
management
4-38
I
NTERFACE
Table 4-11 IP Filter Commands
Function
Configures IP addresses that are allowed
management access
Displays the switch to be monitored or
configured from a browser
Mode Page
GC
4-39
PE
4-40