Table of Contents
Advertisement
Command
ip
domain-lookup
show hosts
show dns
show dns cache Displays entries in the DNS cache
clear dns cache
ip host
This command creates a static entry in the DNS table that maps a host
name to an IP address. Use the no form to remove an entry.
Syntax
[no] ip host name address1 [address2 ... address8]
• name - Name of the host. (Range: 1-64 characters)
• address1 - Corresponding IP address.
• address2 ... address8 - Additional corresponding IP addresses.
Default Setting
No static entries
Command Mode
Global Configuration
Command Usage
Servers or other network devices may support one or more
connections via multiple IP addresses. If more than one IP address is
associated with a host name using this command, a DNS client can try
each address in succession, until it establishes a connection with the
target device.
Table 4-73 DNS Commands (Continued)
Function
Enables DNS-based host name-to-address
translation
Displays the static host name-to-address
mapping table
Displays the configuration for DNS services
Clears all entries from the DNS cache
DNS C
OMMANDS
Mode Page
GC
4-290
PE
4-291
PE
4-292
PE
4-292
PE
4-293
4-285
Advertisement
Table of Contents
