Show Mac-Address-Table Multicast - SMC Networks 8708L2 - annexe 1 Management Manual

Example
The following shows the current IGMP snooping configuration:
Console#show ip igmp snooping
Service status:
Querier status:
Query count:
Query interval:
Query max response time: 10 sec
Router port expire time: 300 sec
IGMP snooping version:
Console#

show mac-address-table multicast

This command shows known multicast addresses.
Syntax
show mac-address-table multicast [vlan vlan-id]
[user | igmp-snooping]
• vlan-id - VLAN ID (Range: 1-4094)
• user - Display only the user-configured multicast entries.
• igmp-snooping - Display only entries learned through IGMP
snooping.
Default Setting
None
Command Mode
Privileged Exec
Command Usage
Member types displayed include IGMP or USER, depending on
selected options.
Example
The following shows the multicast entries learned through IGMP
snooping for VLAN 1:
Console#show mac-address-table multicast vlan 1 igmp-snooping
VLAN M'cast IP addr. Member ports Type
---- --------------- ------------ -------
1
Console#
Enabled
Disabled
2
125 sec
Version 2
224.1.2.3
M
ULTICAST
Eth1/11 IGMP
F C
ILTERING OMMANDS
4-271