Configuring Intelligent Platform; Management Interface (Ipmi); Configuring Ipmi Using Web-Based Interface; Configuring Ipmi Using The Racadm Cli - Dell IDRAC6 User Manual

Configuring Intelligent Platform

Management Interface
This section provides information about configuring and using the iDRAC6
IPMI interface. The interface includes the following:
• IPMI over LAN
• IPMI over Serial
• Serial over LAN
The iDRAC6 is fully IPMI 2.0 compliant. You can configure the iDRAC6
IPMI using:
• iDRAC6 GUI from your browser
• An open source utility, such as IPMItool
• The Dell OpenManage IPMI shell, ipmish
• RACADM
For more information about using the IPMI Shell, ipmish, see the Dell
OpenManage Baseboard Management Controller Utilities User's Guide
support.dell.com\manuals
For more information about using RACADM, see "Using RACADM
Remotely" on page 111.

Configuring IPMI Using Web-Based Interface

For detailed information, see "Configuring IPMI Using Web Interface" on
page 61.

Configuring IPMI Using the RACADM CLI

1 Login to the remote system using any of the RACADM interfaces.
See "Using RACADM Remotely" on page 111.
2 Configure IPMI over LAN.
.
Configuring Intelligent Platform Management Interface
13
at
249