Accessing The Web Interface - Dell IDRAC6 User Manual

Accessing the Web Interface

To access the iDRAC6 Web interface, perform the following steps:
1 Open a supported Web browser window.
To access the Web interface using an IPv4 address, go to step 2.
To access the Web interface using an IPv6 address, go to step 3.
2 Access the Web interface using an IPv4 address; you must have
IPv4 enabled:
In the browser Address bar, type:
https://<iDRAC-IPv4-address>
Then, press <Enter>.
3 Access the Web interface using an IPv6 address; you must have IPv6
enabled.
In the browser Address bar, type:
https://[<iDRAC-IPv6-address>]
Then, press <Enter>.
4 If the default HTTPS port number, port 443, has been changed, type:
https://<iDRAC-IP-address>:<port-number>
where iDRAC-IP-address is the IP address for the
iDRAC6 and port-number is the HTTPS port number.
5 In the Address field, type https://<iDRAC-IP-address> and press
<Enter>.
If the default HTTPS port number (port 443) has been changed, type:
https://<iDRAC-IP-address>:<port-number>
where iDRAC-IP-address is the IP address for the iDRAC6 and
port-number is the HTTPS port number.
The iDRAC6 Login window is displayed.
46
Configuring the iDRAC6 Using the Web Interface