Dell IDRAC6 User Manual page 76

Table 4-23. Telnet Settings
Setting
Timeout
Port Number
Table 4-24. Remote RACADM Settings
Setting
Enabled
Active Sessions
Table 4-25. SNMP Settings
Setting
Enabled
SNMP Community
Name
Table 4-26. Automated System Recovery Agent Setting
Setting
Enabled
76
Configuring the iDRAC6 Using the Web Interface
(continued)
Description
The Telnet idle timeout in seconds. Timeout range is 60 to
10800 seconds. Enter 0 seconds to disable the Timeout
feature. The default is 1800.
The port on which the iDRAC6 listens for a Telnet
connection. The default is 23.
Description
Enables/disables remote RACADM. When checked,
remote RACADM is enabled.
The number of current remote RACADM sessions on the
system. You cannot edit this field.
Description
Enables/disables SNMP . When checked, SNMP is enabled.
Enables/disables the SNMP Community Name.
When checked, the SNMP Community Name is enabled.
The name of the community that contains the IP address for
the SNMP Alert destination. The Community Name may be
up to 31 nonblank characters in length. The default is public.
Description
Enables/disables the Automated System Recovery Agent.
When checked, the Automated System Recovery Agent is
enabled.