Frequently Asked Questions About Sso - Dell IDRAC6 User Manual

Access PropertiesiDRAC Information page, and the domain
controller time by right clicking on the time in the bottom right hand
corner of the screen. The timezone offset is displayed in the pop up
display. For US Central Standard Time (CST), this is –6 ). Use the
following RACADM timezone offset command to synchronize the
iDRAC6 time (through Remote or Telnet/SSH RACADM): racadm
config -g cfgRacTuning –o cfgRacTuneTimeZoneOffset
<offset value in minutes>. For example, if the system time is
GMT -6 (US CST) and time is 2PM, set the iDRAC6 time to GMT time
of 18:00 which would require you to enter 360 in the above command for
the offset. You can also use cfgRacTuneDaylightoffset to allow for daylight
savings variation. This saves you from having to change the time on those
two occasions every year when the daylight savings adjustments are made,
or allow for it in the above offset using 300 in the above example.

Frequently Asked Questions About SSO

SSO login fails on Windows Server 2008 R2 x64. What should I do for SSO
to work with Windows Server 2008 R2 x64?
1 Execute
http://technet.microsoft.com/en
domain controller and domain policy. Configure your computers to use
the DES-CBC-MD5 cipher suite. These settings might affect
compatibility with client computers or services and applications in your
environment. The Configure encryption types allowed for Kerberos policy
setting is located at Computer Configuration\Security Settings\Local
Policies\Security Options.
2 The domain clients must have the updated GPO. At the command line,
type gpupdate /force and delete the old key tab with klist
purge cmd.
3 Once the GPO has been updated, create the new keytab.
4 Upload the keytab to the iDRAC6.
You can now log in to iDRAC using SSO.
200
Configuring iDRAC6 for Single Sign-On or Smart Card Login
us/library/dd560670(WS.10).aspx for the
-