Table 4-19. Active Directory Configuration and Management Page Buttons
Button
Print
Refresh
Configure Active
Directory
Test Settings
Configuring and Managing Generic LDAP
iDRAC6 provides a generic solution to support Lightweight Directory Access
Protocol (LDAP)-based authentication. This feature does not require any
schema extension on your directory services. For information on configuring
generic LDAP Directory Service, see "Generic LDAP Directory Service" on
page 178.
Configuring iDRAC6 Services
NOTE:
To modify these settings, you must have Configure iDRAC permission.
1 Click Remote Access Network/Security. Click the Services tab to
display the Services configuration page.
2 Configure the following services, as required:
•
Local Configuration — see Table 4-20
•
Web server — see Table 4-21 for Web server settings
•
SSH — see Table 4-22 for SSH settings
•
Telnet — see Table 4-23 for Telnet settings.
•
Remote RACADM — see Table 4-24 for Remote RACADM settings.
•
SNMP Agent — see Table 4-25 for SNMP settings.
Definition
Prints the values that are displayed on the Active Directory
Configuration and Management page.
Reloads the Active Directory Configuration and Management
page.
Enables you to configure Active Directory. See "Using the
iDRAC6 Directory Service" on page 143 for detailed configuration
information.
Allows you to test the Active Directory configuration using the
settings you specified. See "Using the iDRAC6 Directory Service"
on page 143 for details on using the Test Settings option.
Configuring the iDRAC6 Using the Web Interface
73