Dell IDRAC6 User Manual page 133

Table 6-5. iDRAC User Privileges
Property
Configure iDRAC
Configure Users
Clear Logs
Execute Server Control
Commands
Access Virtual Console
Access Virtual Media
Test Alerts
Execute Diagnostic
Commands
Table 6-6. iDRAC Group Permissions
User Group
Administrator
Operator
Read Only
None
(continued)
Description
Enables the user to configure the iDRAC.
Enables the user to allow specific users to access
the system.
CAUTION:
who are members of the Administrator role on iDRAC.
However, users in the 'Operator' role can be assigned this
privilege. A user with this privilege can modify any user's
configuration. This includes creation or deletion of any
user, SSH Key management for users, and so on. For these
reasons, assign this privilege carefully.
Enables the user to clear the iDRAC logs.
Enables the user to execute Server Control commands.
Enables the user to run Virtual Console.
Enables the user to run and use Virtual Media.
Enables the user to send test alerts (e-mail and PET) to a
specific user.
Enables the user to run diagnostic commands.
Permissions Granted
Login to iDRAC, Configure iDRAC, Configure Users, Clear
Logs, Execute Server Control Commands, Access Virtual
Console, Access Virtual Media, Test Alerts, Execute Diagnostic
Commands
Selects any combination of the following permissions: Login to
iDRAC, Configure iDRAC, Configure Users, Clear Logs, Execute
Server Action Commands, Access Virtual Console, Access Virtual
Media, Test Alerts, Execute Diagnostic Commands
Login to iDRAC
No assigned permissions
Adding and Configuring iDRAC6 Users
This privilege is normally reserved for users
133