Configuring Vflash Or Standard Sd Card Using Idrac6 Web Interface - Dell IDRAC6 User Manual

If you are an administrator, you can perform all operations on the vFlash
partitions. If not, you must have Access Virtual Media privilege to create,
delete, format, attach, detach, or copy the contents for the partition.
Configuring vFlash or Standard SD Card Using
iDRAC6 Web Interface
After you install the vFlash or standard SD card, you can view its properties,
enable or disable vFlash, and initialize the card. The vFlash functionality
must be enabled to perform partition management. When the card is
disabled, you can only view its properties. The initialize operation removes
existing partitions and resets the card.
NOTE:
You must have Configure iDRAC permission to enable or disable vFlash, or
to initialize the card.
If the card is not available in the system's iDRAC6 Enterprise card slot, the
following error message is displayed.
SD card not detected. Please insert an SD card of size
256MB or greater.
To view and configure the vFlash or standard SD card:
1 Open a supported Web browser window and log in to the iDRAC6 Web
interface.
2 In the system tree, select System.
3 Click the vFlash tab. The SD Card Properties page is displayed.
Table 15-1 lists the properties displayed for the SD card.
Table 15-1. SD Card Properties
Attribute
Name
Size
270
Configuring vFlash SD Card and Managing vFlash Partitions
Description
Displays the name of the card inserted into the server's iDRAC6
Enterprise card slot. If the card supports the new enhanced
vFlash features, it displays vFlash SD Card. If it supports limited
vFlash features, it displays SD Card.
Displays the size of the card in gigabytes (GB).