Dell IDRAC6 User Manual page 130

• The username, password, and access permissions for a new or existing
iDRAC user. Table 6-3 describes General User Settings.
The user's IPMI privileges. Table 6-4 describes the IPMI User
•
Privileges for configuring the user's LAN privileges.
• The iDRAC user privileges. Table 6-5 describes the iDRAC User
Privileges.
• The iDRAC Group access permissions. Table 6-6 describes the
iDRAC Group Permissions.
4 When completed, click Apply Changes.
5 Click the appropriate button to continue. See Table 6-7.
Table 6-1. User States and Permissions
Setting
User ID
State
User Name
iDRAC
LAN
Serial Port
Serial Over LAN
130
Adding and Configuring iDRAC6 Users
Description
Displays a sequential list of user ID numbers. Each field
under User ID contains one of 16 preset User ID numbers.
This field cannot be edited.
Displays the login state of the user: Enabled or Disabled.
(Disabled is the default.)
NOTE:
User 2 is enabled by default.
Displays the login name of the user. Specifies an iDRAC6
user name with up to 16 characters. Each user must have a
unique user name.
NOTE:
If the user name is changed, the new name will not
appear in the user interface until the next user login.
Displays the group (privilege level) to which the user is
assigned (Administrator, Operator, Read Only, or None).
Displays the IPMI LAN privilege level to which the user is
assigned (Administrator, Operator, Read Only, or None).
Displays the IPMI Serial Port privilege level to which the user
is assigned (Administrator, Operator, Read Only, or None).
Allows or disallows the user to use IPMI Serial Over LAN.