Adding and Configuring
iDRAC6 Users
To manage your system with the iDRAC6 and maintain system security, create
unique users with specific administrative permissions (or role-based authority).
For additional security, you can also configure alerts that are e-mailed to
specific users when a specific system event occurs.
Using the Web Interface to Configure iDRAC6 Users
Adding and Configuring iDRAC6 Users
To manage your system with the iDRAC6 and maintain system security,
create unique users with specific administrative permissions (or role-based
authority).
To add and configure iDRAC6 users, perform the following steps:
NOTE:
You must have Configure Users permission to configure an iDRAC user.
1 Click Remote AccessNetwork/SecurityUsers.
The Users page (see Table 6-1) displays the following information for
iDRAC6 users: User ID, State (Enabled/Disabled), User Name, iDRAC,
LAN, Serial Port, and Serial Over LAN (Enabled/Disabled).
NOTE:
User 1 is reserved for the IPMI anonymous user and is not configurable.
2 In the User ID column, click a user ID number.
On the User Main Menu page (see Table 6-2 and Table 6-8), you can
configure a user, view or upload a user certificate, upload a trusted
certification authority (CA) certificate, view a trusted CA certificate,
upload a Secure Shell (SSH) public key file or view or delete a specified
SSH key or all SSH keys.
If you select Configure User and click Next, the User Configuration page
is displayed.
3 On the User Configuration page, configure the following:
Adding and Configuring iDRAC6 Users
6
129