Adding Idrac Users And Privileges To Microsoft Active Directory - Dell IDRAC6 User Manual

3 Click Add/Remove Snap-in.
4 Select the Active Directory Users and Computers Snap-in and click Add.
5 Click Close and click OK.

Adding iDRAC Users and Privileges to Microsoft Active Directory

Using the Dell-extended Active Directory Users and Computers Snap-in,
you can add iDRAC users and privileges by creating iDRAC, Association, and
Privilege objects. To add each object type, perform the following procedures:
• Create an iDRAC device Object
• Create a Privilege Object
• Create an Association Object
• Configuring an Association Object
Creating an iDRAC Device Object
1 In the MMC Console Root window, right-click a container.
2 Select New Dell Remote Management Object Advanced.
The New Object window is displayed.
3 Type a name for the new object. The name must be identical to the
iDRAC Name that you will type in Step A of "Configuring Microsoft Active
Directory With Extended Schema Using the iDRAC6 Web-Based
Interface" on page 162.
4 Select iDRAC Device Object.
5 Click OK.
Creating a Privilege Object
NOTE:
A Privilege Object must be created in the same domain as the related
Association Object.
1 In the Console Root (MMC) window, right-click a container.
2 Select New Dell Remote Management Object Advanced.
The New Object window is displayed.
3 Type a name for the new object.
4 Select Privilege Object.
160
Using the iDRAC6 Directory Service