Dell IDRAC6 User Manual page 107

Table 5-8. IPMI Serial Settings
Setting
Flow Control
Channel Privilege
Level Limit
Table 5-9. iDRAC6 Serial Settings
Setting
Enabled
Timeout
Redirect Enabled
Baud Rate
Escape Key
History Buffer Size
Login Command
Table 5-10. Serial Page Settings
Button
Print
Refresh
Apply Changes
Terminal Mode Settings Opens the Terminal Mode Settings page.
(continued)
Description
• None — Hardware Flow Control Off
• RTS/CTS — Hardware Flow Control On
• Administrator
• Operator
• User
Description
Enables or disables the iDRAC6 serial console. Checked=
Enabled; Unchecked=Disabled
The maximum number of seconds of line idle time before the
line is disconnected. The range is 60 to 1920 seconds. Default
is 300 seconds. Use 0 seconds to disable the Timeout feature.
Enables or disables Virtual Console. Checked=Enabled;
Unchecked=Disabled
The data speed on the external serial port. Values are 9600
bps, 19.2 kbps, 57.6 kbps, and 115.2 kbps. Default is
57.6 kbps.
Specifies the <Esc> key. The default are the ^\ characters.
The size of the serial history buffer, which holds the last
characters written to the Virtual Console. The maximum and
default = 8192 characters.
The iDRAC6 command line to be executed upon valid login.
Description
Print the Serial page.
Refresh the Serial page.
Apply the IPMI and iDRAC6 serial changes.
Advanced iDRAC6 Configuration
107