Configuring Microsoft Active Directory With Extended Schema Using Racadm - Dell IDRAC6 User Manual

NOTE:
Server Address field should match the Subject or Subject Alternative Name
field of your domain controller certificate if you have certificate validation
enabled.
15 Click Next. The Active Directory Configuration and Management Step 3
of 4 page is displayed.
16 Under Schema Selection, select Extended Schema.
17 Click Next. The Active Directory Configuration and Management Step 4
of 4 page is displayed.
18 Under Extended Schema Settings, type the iDRAC Name and iDRAC
Domain Name to configure the iDRAC device object. The iDRAC
domain name is the Domain in which iDRAC Object is created.
19 Click Finish to save Active Directory Extended Schema settings.
The iDRAC6 Web server automatically returns you to the Active
Directory Configuration and Management page.
20 Click Test Settings to check the Active Directory Extended Schema settings.
21 Type your Active Directory user name and password.
The test results and the test log are displayed. For additional information,
see "Testing Your Configurations" on page 177.
NOTE:
Active Directory login. Click Remote Access
page to configure DNS server(s) manually or use DHCP to get DNS server(s).
You have completed the Active Directory configuration with Extended Schema.
Configuring Microsoft Active Directory With Extended Schema Using
RACADM
Use the following commands to configure the iDRAC6 Microsoft Active
Directory feature with Extended Schema using the RACADM CLI tool
instead of the Web-based interface.
1 Open a command prompt and type the following RACADM commands:
racadm config -g cfgActiveDirectory -o cfgADEnable 1
racadm config -g cfgActiveDirectory -o cfgADType 1
164
Using the iDRAC6 Directory Service
The FQDN or IP address that you specify in the Domain Controller
You must have a DNS server configured properly on iDRAC to support

Network/Security

Network