Dell IDRAC6 User Manual page 362

Table 22-16. Network Security Page Settings
Settings
IP Range Enabled Enables the IP Range checking feature, which defines a specific
IP Range Address
IP Range Subnet
Mask
IP Blocking
Enabled
IP Blocking Fail
Count
IP Blocking Fail
Window
IP Blocking
Penalty Time
Table 22-17. Network Security Page Buttons
Button
Print
Refresh
Apply Changes
Go Back to Network
Configuration Page
362
Configuring Security Features
Description
range of IP addresses that can access the iDRAC6.
Determines the acceptable IP address bit pattern, depending on
the 1's in the subnet mask. This value is bitwise AND'd with the
IP Range Subnet Mask to determine the upper portion of the
allowed IP address. Any IP address that contains this bit pattern
in its upper bits is allowed to establish an iDRAC6 session.
Logins from IP addresses that are outside this range will fail.
The default values in each property allow an address range from
192.168.1.0 to 192.168.1.255 to establish an iDRAC6 session.
Defines the significant bit positions in the IP address.
The subnet mask should be in the form of a netmask, where the
more significant bits are all 1's with a single transition to all
zeros in the lower-order bits.
For example: 255.255.255.0
Enables the IP address blocking feature, which limits the
number of failed login attempts from a specific IP address for a
preselected time span.
Sets the number of login failures attempted from an IP address
before the login attempts are rejected from that address.
Determines the time span in seconds within which IP Block Fail
Count failures must occur to trigger the IP Block Penalty Time.
The time span in seconds within which login attempts from an
IP address with excessive failures are rejected.
Description
Prints the Network Security page
Reloads the Network Security page
Saves the changes made to the Network Security page.
Returns to the Network page.