Viewing Available Partitions - Dell IDRAC6 User Manual

To format vFlash partition:
1 On the iDRAC6 Web interface, select SystemvFlash tabFormat
subtab. The Format Partition page is displayed.
2 Enter the information mentioned in Table 15-4.
3 Click Apply. A warning message indicating that all the data on the
partition will be erased is displayed. Click OK. The selected partition is
formated to the specified file system type.
An error message is displayed if:
• The card is write-protected.
• An initialize operation is already being performed on the card.
Table 15-4. Format Partition Page Options
Field
Label
Format Type

Viewing Available Partitions

Ensure that the vFlash or standard SD card is enabled to view the list of
available partitions.
To view the available partitions on the card:
1 On the iDRAC6 Web interface, select SystemvFlashManage
subtab. The Manage Partitions page lists the available partitions.
2 For each partition, you can view the information mentioned in Table 15-5.
Configuring vFlash SD Card and Managing vFlash Partitions
Description
Select the partition label that you want to format. The first
available partition is selected by default.
All existing partitions of type Floppy or Hard Disk are
available in the drop-down list. Partitions that are attached
or that are read-only are not available in the drop-down list.
Select the file system type you want to format the partition
to. The available options are EXT2, EXT3, FAT16, and
FAT32.
279