Dell IDRAC6 User Manual page 329

Integrated dell remote access controller 6 version 1.5
Hide thumbs Also See for IDRAC6:
Table of Contents

Advertisement

Table 19-5. IPv4 Information
Field
IPv4 Enabled
IP Address
Subnet Mask
Gateway
DHCP Enabled
Use DHCP to obtain
DNS server addresses
Preferred DNS Server Indicates the static IPv4 address for the preferred DNS server.
Alternate DNS Server Indicates the static IPv4 address for the alternate DNS server.
Table 19-6. IPv6 Information Fields
Field
IPv6 Enabled
IP Address 1
IP Gateway
Link Local Address
IP Address 2...15
Description
Yes or No
The 32-bit address that identifies the Network Interface Card
(NIC) to a host. The value is in the dot separated format,
such as 143.166.154.127.
The Subnet Mask identifies the parts of the IP Address that
are the Extended Network Prefix and the Host Number. The
value is in the dot separated format, such as 255.255.0.0.
The address of a router or a switch. The value is in the dot
separated format, such as 143.166.154.1.
Yes or No. Indicates if the Dynamic Host Configuration
Protocol (DHCP) is enabled.
Yes or No. Indicates if you want to use DHCP to obtain DNS
server addresses.
Description
Indicates whether IPv6 stack is enabled.
Specifies the IPv6 address/prefix length for the iDRAC6 NIC.
The prefix length is combined with the IP Address 1. This is
an integer specifying the prefix length of the IPv6 address. It
can be a value between 1 and 128.
Specifies the gateway for the iDRAC6 NIC.
Specifies the iDRAC6 NIC IPv6 address.
Specifies the additional IPv6 addresses for the iDRAC6 NIC,
if available.
Recovering and Troubleshooting the Managed System
329

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents