Dell IDRAC6 User Manual page 83

To enable remote file sharing through the iDRAC6 Web interface, do the
following:
1 Open a supported Web browser window.
2 Log in to iDRAC6 Web interface.
3 Select the SystemRemote File Share tab.
The Remote File Share screen is displayed.
Table 4-30 lists the remote file share settings.
Table 4-30. Remote File Server Settings
Attribute
User Name
Password
Image File Path
Status
Click Connect to connect to RFS. After successfully establishing the
connection, Connect is disabled.
NOTE:
Even if you have configured remote file sharing, the GUI does not display
this information due to security reasons.
For remote file share, the remote RACADM command is:
racadm remoteimage.
racadm remoteimage <options>
Options are:
• –c ; connect image
• –d ; disconnect image
• –u <username>; username to access the network share
• –p <password>; password to access the network share
Description
Username to connect for NFS/CIFS file system.
Password to connect for NFS/CIFS file system.
Path of the file to be shared through remote file share.
Connected: The file is shared.
Not Connected: The file is not shared.
Connecting... : Connection to the share is in-progress.
Configuring the iDRAC6 Using the Web Interface
83