Dell IDRAC6 User Manual page 132

Table 6-3. General User Settings
New Password
Confirm New
Password
Table 6-4. IPMI User Privileges
Property
Maximum LAN User
Privilege Granted
Maximum Serial Port
User Privilege Granted
Enable Serial Over LAN
Table 6-5. iDRAC User Privileges
Property
Roles
Login to iDRAC
132
Adding and Configuring iDRAC6 Users
Enter a Password with up to 20 characters. The characters
will not be displayed and are masked. The following
characters are supported:
• 0-9
• A-Z
• a-z
• Special characters:
+ & ?
! ( '
# ) *
% = <
Retype the iDRAC user's password to confirm.
Description
Specifies the user's maximum privilege on the
IPMI LAN channel to one of the following user groups:
Administrator, Operator, User, or None.
Specifies the user's maximum privilege on the
IPMI Serial channel to one of the following user groups:
Administrator, Operator, User, or None.
Allows the user to use IPMI Serial Over LAN.
When checked, this privilege is enabled.
Description
Specifies the user's maximum iDRAC user privilege as
one of the following: Administrator, Operator, Read
Only, or None. See Table 6-6 for iDRAC Group
Permissions.
Enables the user to log in to the iDRAC.
> - }
, _ [
; $ ]
: { I
| .
" @
/ §
\