Configuring Linux For Serial Console During Boot - Dell IDRAC6 User Manual

Table 5-1. Cryptography Schemes
Scheme Type
Asymmetric Cryptography Diffie-Hellman DSA/DSS 512-1024 (random) bits per
Symmetric Cryptography
Message Integrity
Authentication
NOTE:
SSHv1 is not supported.

Configuring Linux for Serial Console During Boot

The following steps are specific to the Linux GRand Unified Bootloader (GRUB).
Similar changes would be necessary if you use a different boot loader.
NOTE:
When you configure the client VT100 emulation window, set the window or
application that is displaying the redirected Virtual Console to 25 rows x 80 columns
to ensure proper text display; otherwise, some text screens may be garbled.
Edit the /etc/grub.conf file as follows:
1 Locate the General Setting sections in the file and add the following two
new lines:
serial --unit=1 --speed=57600
terminal --timeout=10 serial
92
Advanced iDRAC6 Configuration
Scheme
NIST specification
• AES256-CBC
• RIJNDAEL256-CBC
• AES192-CBC
• RIJNDAEL192-CBC
• AES128-CBC
• RIJNDAEL128-CBC
• BLOWFISH-128-CBC
• 3DES-192-CBC
• ARCFOUR-128
• HMAC-SHA1-160
• HMAC-SHA1-96
• HMAC-MD5-128
• HMAC-MD5-96
• Password