Dell IDRAC6 User Manual page 271

Table 15-1. SD Card Properties
Attribute
Available Space
Write-protected
Health
vFlash Enabled
4 Click Apply to enable or disable the vFlash partition management on the
card.
If any vFlash partition is attached, you cannot disable vFlash and an error
message is displayed.
NOTE:
If vFlash is disabled, only the SD Card Properties subtab is displayed.
5 Click Initialize. All existing partitions are removed and the card is reset. A
confirmation message is displayed.
6 Click OK. After initialize operation is complete, a successful message is
displayed.
NOTE:
Initialize is enabled only if you select the vFlash Enabled option.
If any vFlash partition is attached, the initialize operation fails and an error
message is displayed.
Configuring vFlash SD Card and Managing vFlash Partitions
(continued)
Description
Displays the unused space on the vFlash SD card in MB. This
space is available to create more partitions on the vFlash SD
card.
If the inserted vFlash SD card is uninitialized, then the available
space displays that the card is uninitialized.
For the standard SD card, the available space is not displayed.
Displays whether the card is write-protected or not.
Displays the overall health of the vFlash SD card. This can be:
• OK
• Warning
• Critical
If it is warning, re-initialize the card.
If it is critical, reinstall and reinitialize the card.
For the standard SD card, the health is not displayed.
Select the checkbox to perform vFlash partition management on
the card. Clear the checkbox to disable vFlash partition
management.
271