Configuring Standard Schema Microsoft Active Directory To Access Idrac6; Configuring Microsoft Active Directory With Standard Schema Using The Idrac6 Web-Based Interface - Dell IDRAC6 User Manual

Configuring Standard Schema Microsoft Active
Directory to Access iDRAC6
You must perform the following steps to configure Active Directory before an
Active Directory user can access iDRAC6:
1 On an Active Directory server (domain controller), open the Active
Directory Users and Computers Snap-in.
2 Create a group or select an existing group. Add the Active Directory user
as a member of the Active Directory group to access the iDRAC6.
3 Configure the name of the group and the domain name on iDRAC6 using
either the Web-based interface or RACADM. For more information, see
"Configuring Microsoft Active Directory With Standard Schema Using
the iDRAC6 Web-Based Interface" on page 170 or "Configuring Microsoft
Active Directory With Standard Schema Using RACADM" on page 174.
Configuring Microsoft Active Directory With Standard Schema Using the
iDRAC6 Web-Based Interface
1 Open a supported Web browser window.
2 Log in to the iDRAC6 Web-based interface.
3 Go to Remote Access Network/Security tab Directory Service tab
Microsoft Active Directory.
4 Scroll to the bottom of the Active Directory Configuration and
Management page, and click Configure Active Directory.
The Active Directory Configuration and Management Step 1 of 4 page is
displayed.
5 Under Certificate Settings, select Enable Certificate Validation if you
want to validate the SSL certificate of your Active Directory servers;
otherwise, go to step 9.
6 Under Upload Active Directory CA Certificate, type the file path of the
certificate or browse to find the certificate file.
NOTE:
the complete file name and file extension.
7
lick Upload.
C
170
Using the iDRAC6 Directory Service
You must type the absolute file path, which includes the full path and