Dell IDRAC6 User Manual page 86

Table 4-32. SD Card States
SD Card State
SD1 and SD2 Boot
Active
Standby
Failed
Absent
Offline
Write
Protected
vFlash Active
Absent
86
Configuring the iDRAC6 Using the Web Interface
Description
The controller is powering up.
The card receives all SD writes and is used for SD reads.
The card is the secondary card. It is receiving a copy of
the all the SD reads.
An error is reported during a SD card read or write.
The SD card is not detected.
At boot, the Card Indentification (CID) signature of the
card is different from the Non-volatile (NV) storage
value or the card is the destination of a copy operation
that is in-progress.
The card is write-protected by the physical latch on the
SD card. IDSDM cannot use a write-protected card.
The card receives all SD writes and is used for SD reads.
The SD card is not detected.