Configuring Quickview Personal Preferences - Dell PowerConnect W-Airwave User Manual

Configuring QuickView Personal Preferences

To configure your personal preferences, click the Display pull down and click
on the preferences icon.
•
General – select from preferences pull down
Enable auto-Refresh toggle
Refresh Interval in minutes
Show Grid Lines toggle
Grid Lines width (in feet) slider
Show Scale
Hide neighbor lines ignored in location calculation
Label transparency slider
•
APs – select from preferences pull down
BW – select the kbps threshold for normal (green), high (yellow),
and excessive (red)
# of Users – select the number of users threshold for normal
(green), high (yellow), and excessive (red)
% of Uptime for the last 24 hours for normal (green) and
excessive (red)
Radio Status – display red or green depending on the status of
the radios within the AP.
AP Status – display red or green in relation to up/down status of
AP.
Show Channel in Label toggle.
Icon Size – select the size of the AP icon display on the floor
plan.
Show Transmit Power in Label.
•
Users – select from preferences pull down
BW – select the kbps threshold for normal (green), high (yellow),
and excessive (red)
Signal Strength – select the dBm client threshold for excellent
(green), average (yellow), and poor (red).
Icon Size – select the size of the client device icon display on the
floor plan.
•
Overlays – select type of overlay
Grid – non vector overlay
Vector – provides much smoother overlay with mouse-over capabilities
• Navigation – select from preferences pull down (campus and buildings)
% of APs Up for the last 24 hours for normal (green) and excessive (red)
Icon Size for campus, building and floor
Note: These preferences are stored in a Flash Shared Object analogous to a browser cookie and are remembered on
subsequent sessions in that browser. Changing browsers or machines will require reconfiguring the preferences.
16
Figure 7. "Personal Preferences"
Visual RF an d Visual RF Plan | User Guide