Wlan Leap; Leap Username; Reset Leap User - Printronix P7000 User Manual

Chapter 4
NETWORK SETUP MENU - P7000HD

WLAN LEAP

WLAN
2
LEAP
(from page 89)
Auth Method LEAP
Username
Open*

LEAP Username (01-15)

Shared LEAP Username (16-30)
1
Kerberos LEAP Username (31-32)
2
LEAP
Auth Method
This feature allows the user to select the authentication method used for the
wireless network interface.
•
Open (default). Selects open authentication.
•
Shared. Selects shared key authentication.
•
Kerberos. Selects Kerberos authentication (for use when a Symbol RF
card is installed).
•
LEAP. Selects LEAP authentication (for use with a Cisco RF card
installed).
LEAP Username
•
LEAP Username (01-15). The first 15 characters of the LEAP user name
(maximum number of characters is 32).
•
LEAP Username (16-30). Characters 16 to 30 of the LEAP user name
(maximum number of characters is 32).
•
LEAP User (31-32). Characters 31 to 32 of the LEAP user name
(maximum number of characters is 32).

Reset LEAP User

Resets the LEAP user name to an empty string.
LEAP Password
•
LEAP Password (01-15). The first 15 characters of the LEAP password
(maximum number of characters is 32).
•
LEAP Password (16-30). Characters 16 to 30 of the LEAP password
(maximum number of characters is 32).
•
LEAP Password (31-32). Characters 31 to 32 of the LEAP password
(maximum number of characters is 32).
Reset LEAP Password
Resets the LEAP password to an empty string.
104
* = Factory Default
1
Only if a Symbol radio card is installed.
2
Only if a Cisco radio card is installed.
Reset LEAP LEAP
User Password
LEAP Password (01-15)
LEAP Password (16-30)
LEAP Password (31-32)
Reset LEAP
Password