Tektronix KEITHLEY System SourceMeter 2636B Reference Manual page 527

Series 2600B System SourceMeter® Instrument Reference Manual
makesetter()
This function creates a function that, when called, sets the value of an attribute.
Type TSP-Link accessible
Function No
Usage
setter = makesetter(table, "attributeName")
setter
table
attributeName
Details
This function is useful for aliasing attributes to improve execution speed. Calling the setter function
will execute faster than accessing the attribute directly.
Creating a setter function is only useful if it is going to be called several times. If you are not calling
the setter function several times, it is more efficient to access the attribute directly.
Example
setlevel = makesetter(smua.source, "levelv")for v = 1, 10 do
setlevel(v)
end
Creates a setter function called setlevel.
Using setlevel() in the loop sets the value of smua.source.levelv, performing a source sweep.
Also see
makegetter() (on page 11-158)
2600BS-901-01 Rev. E / January 2019
Affected by Where saved
Function that sets the value of the attribute
Read-only table where the attribute is located
The string name of the attribute
Section 11: TSP command reference
Default value
11-159