Confirming The Active Speed And Duplex Negotiation; Confirming Port Numbers - Tektronix KEITHLEY System SourceMeter 2636B Reference Manual

Series 2600B System SourceMeter® Instrument Reference Manual

Confirming the active speed and duplex negotiation

The Series 2600B automatically detects the speed and duplex negotiation active on the LAN. Once
the speed and duplex negotiation is detected, the instrument automatically adjusts its own settings to
match the LAN settings.
To confirm the active LAN speed and duplex mode:
1. From the front panel, press the MENU key.
2. Select LAN > STATUS.
3. Use the navigation wheel

SPEED

DUPLEX
4. Press the ENTER key to view the active setting.
5. Press the EXIT (LOCAL) key once to return to the STATUS menu

Confirming port numbers

To view the port number assigned to each remote interface protocol:
1. From the front panel, press the MENU key, and then select LAN > STATUS > PORT.
2. Use the navigation wheel

RAW-SOCKET

TELNET

VXI-11

DST
3. Press the ENTER key to view the port number.
4. Press the EXIT (LOCAL) key once to return to the PORT menu.
The following table displays the remote interface protocols supported by the Series 2600B and their
assigned port numbers.
Port number
Command interface
Raw socket
Telnet
VXI-11
DST (dead socket termination)
2600BS-901-01 Rev. E / January 2019
to select one of the following:
to select one of the following:
Port number
5025
23
1024
5030
Appendix B: LAN concepts and settings
B-17