Tektronix KEITHLEY System SourceMeter 2636B Reference Manual page 450

Section 11: TSP command reference
Example
display.clear()
display.settext("Normal $BBlinking$N")
display.settext("$DDim $FBackgroundBlink$R $$$$ 2 dollars")
This example sets the display to:
Normal Blinking
Dim BackgroundBlink $$ 2 dollars
with the named effect on each word.
Also see
display.clear()
display.getcursor()
display.gettext()
display.screen
display.setcursor()
display.smuX.digits
This attribute sets the front-panel display resolution of the selected measurement.
Type TSP-Link accessible
Attribute (RW) Yes
Usage
digits = display.smuX.digits
display.smuX.digits = digits
digits
X
Details
SMU A and SMU B can be set for different measurement display resolutions.
Example
display.smua.digits = display.DIGITS_5_5
Also see
Display resolution
11-82
(on page 11-65)
(on page 11-67)
(on page 11-69)
(on page 11-78)
(on page 11-80)
Affected by
Instrument reset
Recall setup
Set digits to one of the following values:

Select 4-1/2 digit resolution (4 or display.DIGITS_4_5)

Select 5-1/2 digit resolution (5 or display.DIGITS_5_5)

Select 6-1/2 digit resolution (6 or display.DIGITS_6_5)
Source-measure unit (SMU) channel (for example, display.smua.digits
applies to SMU channel A)
(on page 3-23)
Series 2600B System SourceMeter® Instrument Reference Manual
Where saved
Saved setup
Select 5-1/2 digit resolution for SMU A.
Default value
5 (display.DIGITS_5_5)
2600BS-901-01 Rev. E / January 2019