Technogym SKILLRUN UNITY 7000 Technical Service Manual page 166

11. In the Equipment Setting section of the 'Equipment Set Up' app, configure the Unity Self by
entering:
▪ the Unity Self number (SET THE EQUIPMENT NUMBER);
Set the EQUIPMENT NUMBER of UNITY SELF with the number 100.
▪ the room name
The name of the room must correspond to the room created in the pro.mywellness.com site. The name
of the room in which the Unity Self is located must be the same as the name of the room where the
Skillruns are located for the specific Skillrun class.
CONFIGURING THE SKILLRUNS
Configure each SKILLRUN, which will be part of the SKILLRUN classes, following the procedure
indicated below:
Pag. 166
Figure 108
Technical Service Guide - Rev. 6.0
Uncontrolled copy if printed
SKILLRUN