What To Do In Case Of Equipment Out Of Order / Blocked; Message On The Display: 'Press "Yes" To Quit This Message; Start Training - Technogym SKILLRUN UNITY 7000 Technical Service Manual

SKILLRUN
Technical Service Guide - Rev. 6.0
7. Position the cable tie as indicated below
8. Turn on the machine
9. Bring the machine to the maximum slope, both positive and negative, for 5 times. Do not
leave excess portions of cable near/below moving parts (tread belt, carriage) and check that
there are no trapped cables.

6.18 WHAT TO DO IN CASE OF EQUIPMENT OUT OF ORDER / BLOCKED.

ATTENTION: In the case of an out of order machine and a blocked machine, the plug
must be removed from the mains socket.
6.19 MESSAGE ON THE DISPLAY: 'PRESS "YES" TO QUIT THIS MESSAGE AND

START TRAINING'

In the case of error 16 or 17, the following message appears on the display: "Press YES to quit this
message and start training"
Click the YES button on the display to try to make the error disappear. Only if the error persists
or if the machine does not work correctly, see the troubleshooting procedure detailed in the para-
graph "6.4 drive error code list".
Uncontrolled copy if printed
Figure 100
Pag. 159