Technogym SKILLRUN UNITY 7000 Technical Service Manual page 107

SKILLRUN
Technical Service Guide - Rev. 6.0
29. Remove the tubular metal piece. Afterwards, put the equipment in a horizontal position.
Position the tread belt correctly along the rollers.
30. Move the tread belt so that the portion without slats is located to the front of the equipment
in order to reassemble the carriage.
Uncontrolled copy if printed
FRONT PART
REAR PART
Figure 67- Detailed view of the slat grooves
31. Position the lower part of the carria-
ge (46) on the equipment.
32. Position the rod (45) on the
equipment.
Pag. 107