Advertisement
④Blade brake adjustment
Lock Nut
AdjustNut
⑤Parking brake adjustment
Tighten
loosen
Brake Spring
Adjust Nut
1) Not only performance maintenance, but also regular inspection of the braking surface is
essential to maintain safety. In the case of the riding type, a serious accident may occur.
Therefore, please ask the store where you purchased the product at least once a year to
inspect it according to the annual inspection table.
2) After adjustment, make sure the parking brake pedal is "locked" and the sub gear shift
lever is in the "neutral" position. and the machine dose not move back and forth when
pushed it , or it dose not
Please ask your dealer for the following work.
1) The brake will also wear out. If the above method cannot be adjusted, the brake shoes
may be worn. For safety, please replace it regularly when the usage time does not exceed
100 hours. When replacing, also replace the U nut and cotter pin at the same time.
2) Adjust the play of the brake spring is about 2 to 4 mm, and after adjusting, securely
tighten the lock nut.
3) The Driving and Blade belt will also be consumed. If it is abnormal, replace it with a new
one. First adjustment is 10 hours and then every 50 hours thereafter.。
①
The Blade will stop in about 5 seconds when the Blade
clutch lever is in the "off" position. If it does not stop, move
the brake wire adjustment nut in the direction of the arrow
to adjust. (Brake drag can cause damage to this product.)
After adjustment, securely fix with the lock nut.
② If it cannot be adjusted, the brake shoes are worn. Please
ask your dealer for replacement.
① The parking brake is located on the left rear side of the
mission and should be adjusted with the brake rod which
is connected to it.
② The adjustment is made with the adjustment nut at the rear
of the brake rod so that the rear wheel "locks" when the
parking brake pedal is fully depressed (when the pedal is
locked). Turn the adjustment nut clockwise to tighten it and
it will begin to operate quickly, and loosen it to slow it down.
move on slopes.
- 46 -
5. 点検・整備・調整
Advertisement
