Advertisement
②Blade belt adjustment (under seat bracket)
Blade Belt
③Adjusting the belt retainer (under the seat bracket)
① Set the cutting height adjustment lever to the position of about 30 mm.
③
Move the Blade clutch lever to the "on" position.
④
Adjust the clearance between each belt retainer with reference to the following.
Pic.1Belt retainer (L )
Pic.3 Belt retainer (Rear)
Visually inspect the belt for damage. If it is cracked or
worn, replace it with a new one.
Pic.2Belt retainer(R)
Left
Pic.3 Belt retainer (Rear) Right
- 45 -
5. 点検・整備・調整
Advertisement
