Advertisement
⑥Blade clutch lever
Turns the Blade rotation "ON (rotation)" and "OFF (stop)". The Blade clutch lever cannot be
operated when the cutting height adjustment lever is in the "move" position.
⑦Change pedal・Speed change Shift lever
Used for running / stopping the product, running direction and speed adjustment. Push the
change pedal forward from the neutral position to move forward, and toward the heel to
move backward. The speed can be adjusted steplessly depending on the angle of depression.
If you do not step on, it will automatically return to neutral
Forward
Change Pedal
Backward
Reference︔
1)
If you want to make it harder to return the Speed change shift lever while driving, tighten the
change brake adjustment screw (see the upper right photo) to the right (in the direction of the
arrow) to brake and make it difficult to return.
2)
The Speed change pedal works together only when the Speed change shift lever is tilted to the
right and placed in the guide groove. Otherwise, the change pedal alone will move.
⑧Driving clutch lever
Normally, use it in the "ON" position. （On the lower left rear part of the machine ,
there is a running clutch as shown below.）If the engine cannot be started, such as
when the battery is exhausted or indoors, it will be easier to move by pushing the unit
by setting it to the "OFF" position.〈
Driving clutch lever
Differential lock lever
Speed chang Shift lever
Please note that it will be need heavy opertation
4.2.4 Refer to How to move when you cannot drive
- 16 -
2.各部の名称とはたらき
Forward
Adjustment screw
Change brake
.
〉
Advertisement
