Recommissioning - Beko QWIK-PURE CS Installation And Operating Manual

QWIK‑PURE ® iCS

8.3 Recommissioning

For recommissioning work to be carried out, the following prerequisites must be fulfilled and the preparatory
tasks must have been completed.
Tool
• No tool necessary
1. The work or troubleshooting on QWIK-PURE
2. The compressed air supply and voltage supply have been established.
3. The Modbus connection has been established.
Image
76 | 132
Preconditions
Material
• No material necessary
Preparatory work
iCS is complete.
®
Commissioning work
Description / explanation
1. Slowly open the condensate feed to the
QWIK-PURE
3 sec
2. Press and hold down the ON/OFF button on the
FRC for 3 seconds.
0 The FRC switches from standby mode to
Installation and operating manual
Protective equipment
To be worn at all times:
iCS.
®
normal mode.