Table of Contents
Advertisement
QWIK‑PURE
®
iCS
2. Safety
2.1 Use
2.1.1 Intended use
The QWIK-PURE
iCS, also referred to as the "product" below, is used to treat compressor condensate from
®
oil-lubricated and oil-free compressors. Physical processes are used to separate oils that can be directly
separated from the corresponding water.
Any other use besides that described in this manual is deemed improper and poses a risk to personnel and
the environment.
The following must be noted for intended use:
•
Read and observe this manual.
•
Use the product and the accessories exclusively within the operating parameters and agreed delivery
conditions specified in section Technical data.
•
Use the product and accessories exclusively with fluids that are free of caustic, aggressive, corrosive,
toxic, flammable, oxidizing and inorganic components.
In case of doubt, analyze the media or accessories.
•
Use the product and the accessories exclusively within a piping system designed in conformity with the
operating parameters specified in section Technical data.
•
Use the product and the accessories exclusively outside of areas exposed to mechanical loads and splash
water.
•
Only use the product and accessories outside of explosion hazard areas.
•
Use the product and the accessories exclusively outside of areas exposed to direct sunlight and heat
sources.
•
Combine the product and the accessories only with the recommended manufacturer products and
components indicated in this manual.
•
Comply with the specified maintenance plan.
Before using the product and accessories, the operator must ensure that all conditions and requirements for
ensuring intended use are available.
The product and accessories are designed only for stationary use in commercial or industrial areas. All of the
assembly, installation, operation, maintenance, disassembly and disposal work described must be performed
exclusively by qualified skilled technical personnel.
6 | 132
Installation and operating manual
Advertisement
Table of Contents
