Safety Instructions And Warning Notices; Generally Applicable Safety Instructions; Safe Operation - Beko QWIK-PURE CS Installation And Operating Manual

QWIK‑PURE ® iCS

2.5 Safety instructions and warning notices

This section provides an overview of all important safety aspects for the protection of persons and for the
safe and trouble-free operation of the product and accessories.
The following sections list the dangers that arise from this product and the accessories even when used as
intended. To minimize the risk of personal injury and property damage and to avoid dangerous situations,
observe the safety instructions listed and comply with the warning notices in the other sections of this
manual.
Basic warning notices and the necessary qualifications of skilled technical personnel are always listed at the
beginning of the section in the "Warning notices" section.
Action-specific warnings are located directly before potentially dangerous action steps or action sequences.

2.5.1 Generally applicable safety instructions

• Before starting work, consult the technical documents for the entire system and make sure to observe the
general operating manual.
• Before starting work, carry out a last minute risk assessment.
• Use appropriate personal protective equipment for all work.
• A safe area must be set up around the work area during all installation, maintenance and repair work.
• Use existing system-specific protection procedures (e.g., LOTO procedure) in order to safely de-energize
and isolate the system or system sections.

2.5.2 Safe operation

The following actions may result in serious injury or death:
• Commissioning and operation of the product and accessories outside the permissible limit values and
operating parameters
• Unauthorized tampering and unauthorized modifications to the product and accessories
To guarantee the safe operation of the product and accessories, observe the following:
• Observe the limits and operating parameters specified on the type plate and in the manual.
• Check whether operating parameters are changed or restricted through the use of permitted accessories.
• Observe the installation conditions and ambient conditions.
• Observe the maintenance intervals.
10 | 132
Installation and operating manual