Querying The Solenoid Valve Status - Beko QWIK-PURE CS Installation And Operating Manual

QWIK‑PURE ® iCS

9.2.4 Querying the solenoid valve status

Image
2 x
1 x
82 | 132
Description / explanation
1. Press the menu button twice.
The time remaining until replacement of the solenoid
valves is displayed.
0 The status LED SOLENOID VALVES flashes green.
Status LED STATUS BAR
4/4 of the length lights up green
3/4 of the length lights up green
2/4 of the length lights up green
1/4 of the length lights up green
1/4 of the length flashes red
0 If the SOLENOID VALVES status LED flashes red,
replace the SOLENOID VALVES Service-Unit (see
section "10.3.3 Replacing solenoid valves" on
page 99).
2. Press the start menu button to exit the menu.
Installation and operating manual
Lifetime of the
solenoid valves
100%
75%
50%
25%
Exceeded