Beko QWIK-PURE CS Installation And Operating Manual page 56

QWIK‑PURE ® iCS
Image
56 | 132
Installation work
Description / explanation
1. Position the collector on a flat surface.
2. Remove the plug from the collector's expansion
connection anticlockwise.
3. Insert the connecting pipe into the expansion
module.
4. Screw in the connecting pipe clockwise by hand
all the way and tighten hand-tight.
5. Align the expansion module with the collector.
0 Insert the connecting pipe into the
collector's expansion connection.
0 Insert the expansion module's positioning
pins into the position openings on the
collector.
Installation and operating manual