Querying Piston Status - Beko QWIK-PURE CS Installation And Operating Manual

Installation and operating manual

9.2.5 Querying piston status

Image
3 x
1 x
Description / explanation
1. Press the menu button three times.
The time remaining until replacement of the piston is
displayed.
0 The status LED PISTON flashes green.
Status LED STATUS BAR
4/4 of the length lights up green
3/4 of the length lights up green
2/4 of the length lights up green
1/4 of the length lights up green
1/4 of the length flashes red
0 If the PISTON status LED flashes red, replace
the PISTON Service-Unit (see section "10.3.4
Replacing the piston" on page 103).
2. Press the start menu button to exit the menu.
QWIK‑PURE iCS
®
Lifetime of the
piston
100%
75%
50%
25%
Exceeded
83 | 132