Activating The Wlan - Beko QWIK-PURE CS Installation And Operating Manual

QWIK‑PURE ® iCS

9.2.6 Activating the WLAN

Image
4 x
3 sec
84 | 132
Description / explanation
1. Press the menu button four times.
The WLAN status is displayed.
0 The status LED WLAN flashes blue.
2. Press and hold the Service button for 3 seconds.
The WLAN is active.
0 The status LED WLAN flashes blue.
0 The FILTER CARTRIDGES status LED lights up
green.
0 The SOLENOID VALVES status LED lights up
green.
0 The PISTON status LED lights up green.
0 The status LED STATUS BAR lights up green.
3. Select the QWIK -PURE 2... network.
4. Enter the password into the security prompt.
Password:
0 The last 10 digits of des network name
(e.g., QWIK-PURE 2320900028)
0 Scan the QR code on the control unit's housing
The WLAN is automatically deactivated after 5 minutes.
Installation and operating manual