Decommissioning Work - Beko QWIK-PURE CS Installation And Operating Manual

Installation and operating manual

12.2 Decommissioning work

Image Description / explanation
1. Cut off the condensate feed to the
QWIK-PURE
condensate into a separate container.
3 sec
2. Switch off the FRC. Press and hold down the ON/
OFF button for 3 seconds.
0 The FRC switches to standby mode.
0 All LEDs go out and the status LED STATUS
3. Close the compressed air supply and lock and tag
it out so that it cannot be opened again.
iCS and divert the incoming
®
BAR flashes white at regular intervals.
QWIK‑PURE iCS
®
113 | 132