Reset Error Message - Beko QWIK-PURE CS Installation And Operating Manual

Installation and operating manual

9.2.10 Reset error message

Image Description / explanation
1. Read the error message via the WLAN function (see
section "3.6 WLAN function" on page 31) or the
Modbus function (see section "3.5 Modbus function"
on page 24).
2. Determine the cause of the error and rectify the error
(see section "15. Troubleshooting" on page 123).
If you cannot fix the cause of the error, contact
BEKO TECHNOLOGIES Service (see section "1.1
Contact" on page 5).
3 sec
3. Press and hold down the Service button and the Enter
button simultaneously for 3 seconds.
0 The error message will be reset.
0 The display will switch to the START MENU
screen.
QWIK‑PURE iCS
®
89 | 132