Switching The Frc On And Off - Beko QWIK-PURE CS Installation And Operating Manual

QWIK‑PURE ® iCS

9.2.2 Switching the FRC on and off

Image
INFORMATION Initial commissioning.
i
80 | 132
3 sec
The FRC will start with the SET NUMBER OF FILTER CARTRIDGES menu during
initial commissioning only, and the status LED FILTER CARTRIDGE SELECTION will
flash green.
• Set the number of filter cartridges in order to get to the START MENU.
3 sec
Installation and operating manual
Description / explanation
Switching on the FRC
Press and hold down the ON/OFF button for
3 seconds.
0 The FRC switches from standby mode to
normal mode.
0 The START MENU will appear.
0 The FRC regulates the condensate flow of
QWIK-PURE iCS.
®
Switch off FRC
Press and hold down the ON/OFF button for
3 seconds.
0 The FRC switches to standby mode.
0 All LEDs go out and the status LED STATUS
BAR flashes white at regular intervals.
0 The condensate is conveyed through the
filter cartridges by gravity only.