Beko QWIK-PURE CS Installation And Operating Manual page 106

QWIK‑PURE ® iCS
Image
106 | 132
Description / explanation
9. Screw in the piston cap clockwise as far as it will
go.
0 Insert the handles of a pair of linesman pliers
into the star-shaped handle of the piston cap
and carefully turn clockwise.
10. After completing the service on the piston, press
and hold down the Enter button for 3 seconds.
0 The status LED STATUS BAR lights up green.
0 The display will switch to the START MENU
screen.
3 sec
11. Restore the condensate feed from the
condensate collecting line to the pressure relief
chamber.
Installation and operating manual